Blister machineThe main features of the introduction:

Blister machine

　　⑴ Product specifications have strong adaptability. The blister machine method can be used to manufacture various products with extra large, extra small, extra thick and extra thin, and the sheet can be as thin1~2MM, even thinner, the product area can be as large10㎡, as small as a few square millimeters, the wall thickness can be as large20mm, small0.1mm.

　　⑵ Products have a wide range of applications. Daily necessities blister machine packaging, hardware blister machine packaging, automotive supplies blister machine packaging, electronic products blister machine packaging, food blister machine packaging, cosmetic blister machine packaging, computer peripheral equipment blister machine packaging, toy blister machine packaging, sporting goods blister machine packaging, stationery blister machine packaging and other vacuum blister machines.

　　Low investment in equipment

　　The mold manufacturing is convenient,(There are plaster mold, copper mold, aluminum mold~~~~)

　　(5) higher production efficiency.

Save raw and auxiliary materials, light weight, convenient transportation, good sealing performance, in line with the requirements of environmental protection and green packaging;Can pack any special-shaped products, packing without additional cushioning materials;The packaged products are transparent and visible, beautiful in appearance, easy to sell, and suitable for mechanized and automated packaging, which is convenient for modern management, saving manpower, and improving efficiency

Commonly used thermoforming plastics and their properties

Plastics can be divided into two categories: thermoplastics and thermosetting plastics according to their heating behavior. The materials used for thermoforming are mostly thermoplastic materials.

Single-layer or multi-layer composite plastic sheets for thermoforming processing(Plate)All materials must have the following process properties

　　1: plastic memory

　　2: Hot Stretching

　　3: Hot Intensity

　　4: Molding temperature

Thermoforming commonly used plastics

1PVC (It is characterized by less impurity content, better transparency, lower price, good dielectric properties, flame retardancy and self-extinguishing.)

2PP (Rich sources, cheap price, excellent performance, wide range of uses, vacuum blister machine.

　　1, small density(PPColorless, odorless, tasteless, non-toxic, flammable, the appearance is white, the density is0.90~0.91g/cm3.)

　　2Good mechanical propertiesPPThe rigidity, elongation is particularly good, good resistance to stress cracking.

　　3Good heat resistance

　　4Good chemical stability

　　5Transparency, good water resistance and waterproof

　　6, processing molding and use strong

3EP(Is currently the largest output, one of the most widely used plastic varieties, odorless, tasteless, non-toxic, flammable)

4PS(Plastic is hard, brittle, transparent, has no odor, emits black smoke when burning, is easy to dye and process, has low moisture absorption, dimensional stability, good electrical insulation and thermal insulation.)

　　1High transparency and gloss

　　2Colorability, excellent hygiene performance

　　3Excellent dielectric properties

　　4Excellent molding performance

Deficiencies:

　　1, brittle

　　2Poor heat resistance

　　3Moisture resistance, poor oxygen resistance

5ABS(Opaque, non-toxic, tasteless)

SixPET (Colorless, odorless, tasteless, non-toxic, excellent transparency, excellent mechanical strength, wear resistance and electrical insulation properties, good creep resistance, rigidity and strength. Excellent hygiene allows it to be in direct contact with food)

SHENZHEN YONGHENGSHENG MACHINERY MANUFACTURING CO., LTD16Over the years has been committed to research and development to provide Shenzhen blister machine, Shenzhen bubble shell machine, Shenzhen vacuum blister machine, Shenzhen thick sheet blister machine, Shenzhen blister forming machine, Shenzhen thermoplastic forming machine,Contact Hotline:0755-84817776