News
News
16
2016-11
Eternal Blister Machine: What are the Tips for Eliminating Blister Machine Equipment Failure
Today, I will tell you about it.Blister machine equipment failure to eliminate what coup? It doesn't matter if you don't know anything about it, then follow Shenzhen now.Eternal Blister MachineI'll take a look at the small series.
The 1. machine does not start: the input wire is blocked, the power cord is reversed, and the voltage is not good.
2. temperatureMeasurementInaccurate: Thermocouple, temperature controller. is not installed correctly and damaged.
The working vacuum degree of the 3. blister machine equipment does not come up: the gas circuit of the blister machine is blocked, the hand valve or solenoid valve is not closed, the vacuum pump motor belt is loose, and the vacuum gauge is damaged.
Trip of 4. main power switch: leakage of input wire on top of heating box, leakage of distribution box, external wire on equipment, leakage of motor, etc.
The 5. suction film is not in place: vacuum degree is not good, air leakage is not good, temperature is not good, the film is too thin, the workpiece has been pasted with other data, the concave depth of the workpiece exceeds the pulling up of the film, the suction time is too short, the film is not pulled up, and the workpiece interval is too close.
The surface of the workpiece covered by the 6. is folded and not smooth or the corners cannot be covered: the film is not straightened, and the film qualityNo.Good, workpiece grindingNo.Well, there's too much glue sprayed and the touch plate under the workpiece is too low.
When the 7. does not reach the suction, the membrane pulls down: does the solenoid valve or hand valve open.
8. drama broken scene: the temperature is too high, the heating time is too long, the film qualityNo.Okay, no heating.
SHENZHEN YONGHENGSHENG MACHINERY MANUFACTURING CO., LTDfor 16 years has been committed to research and development to provide shenzhen blister machine, shenzhen bubble shell machine, shenzhen vacuum blister machine, shenzhen thick piece blister machine, shenzhen blister forming machine, shenzhen thermoplastic forming machine, blister machine hotline: 0755-84817776,If you want to know more knowledge, you can also go to the official website to see:http://szqxj.a5.nw-host.com/
Related News
2024-03-20
Blister machine preparation before starting
2024-03-13
Automation Technology of Blister Machine
2024-03-08
Shenzhen Eternal Blister Machinery Features
2024-03-01
Contact us for a complete solution.
Contact:+86 13828714526 Mr. Qu
Telephone:+86 0755-84817776 / +86 0755-84807776
Fax: 0755-84808776
E-mail:yongheng@szyongheng.cn
Address: Building A, 22 Pingxi South Road, Pingxi Community, Pingdi Street, Longgang District, Shenzhen
online message
Add WeChat
