In order to make good use of employeesBlister machineTo ensure the smooth progress of production, protect the health and safety of employees, and ensure that products can meet quality standards in production, the following procedures are formulated:

What is blister machine

1.Blister machine operating procedures1Turn on the air source switch, input compressed air, and the pressure plate of the blister machine is actively closed. According to the size of the package and the actual packaging situation, the air pressure is adjusted to the appropriate pressure. The greater the air pressure, the faster the pressure of the pressure plate, and the greater the pressure.

2Turn on the power of the blister machine220VSocket, open the circuit of the blister machine.seoOptimization, then the electric wood mold is placed on the turntable, and then the wire on the mold is connected to the terminal in the middle of the turntable.

3,Push the rotating plate counterclockwise to observe whether the active pressing of the pressing plate is normal. If there is no abnormality, put the blister cover paper on the bakery mold to start trial packaging, turn on the heating switch, turn on the heating time system, adjust the current conversion system from small to large, select the appropriate heating current gear, heating time system and cooling time system according to the actual mold size, and adjust them to freehand brushwork respectively.

Main structure and operation technology of blister machine

42. The operator puts the blister machine, the packaged object and the cardboard into the electric wood mold in sequence, and rotates the mold table counterclockwise. The blister machine will actively complete the sealing of the packaged object according to the debugged state.

5After the blister machine is finished, close the general system and air source.

2. blister machine safety detailed matters

1During the operation of the blister machine, do not put your hands under the pressure plate.

2After the electric wood mold is electrified, its appearance must be covered with a layer of thick cardboard to prevent the heating sheet of the electric wood mold from burning the elastic glue of the pressure plate of the blister machine.

32. Blister machine operators must receive pre-job training, training qualified before holding the license.

3. blister machine maintenance and cleaning matters

11. Clean the working table of the blister machine once a day.

2Every week, add oil to the oil mist device of the pressure regulating valve of the plastic suction machine.1Times.

3Add butter to the cylinder guide post of blister machine every week1Times.

4A comprehensive maintenance of the blister machine once a year.

SHENZHEN YONGHENGSHENG MACHINERY MANUFACTURING CO., LTD19Over the years has been committed to research and development to provide Shenzhen blister machine, Shenzhen bubble shell machine, Shenzhen vacuum blister machine, Shenzhen thick sheet blister machine, Shenzhen blister forming machine, Shenzhen thermoplastic forming machine,Contact Hotline:0755-84817776