News
News
22
2019-01
Eternal blister machine: blister machine to step up the device
We are usingBlister machineAt the same time, the clamping device of the blister machine will be used, mainly when the plastic sheet is formed, the sheet will be fixed on the clamping device.
In thermoforming general-purpose and composite thermoforming machines are usually used to facilitate the holding of various sizes of sheet material clamping device. But also some is the whole molding machine directly with a set of clamping frame.
The clamping device of the blister machine can be divided into two categories: one is frame type, and the other is split-petal type. The clamping device of the frame-type blister machine includes two upper and lower frames.
The sheet is usually sandwiched between two frames. When the frame is opened, the lower frame is usually maintained in a fixed state. Then the lower part of the upper frame of each type of single station molding machine is directly fixed on the molding chamber.
In the case of manual and semi-automatic molding machines in which the parison and the finished product are taken out by hand, when the frame size is large, it will be equipped with a safe operating device within the open scale of the frame.
As for the parison with large sliding property of the molding suction machine, it is required that the clamping force can be adjusted in a relatively wide scale. Therefore, it is necessary to use two rubber-coated rollers, and then use springs to press each other. At the same time, it must be equipped with a pressure adjustment device. The clamping of the continuous pull tab forming machine is the joint action of the zippers on both sides and the front and rear brakes.
The clamping device of the blister machine is best even if it can be automatically controlled, so as to ensure that the action can be rapid, and further help to improve the quality and efficiency of the parts.
SHENZHEN YONGHENGSHENG MACHINERY MANUFACTURING CO., LTD16Over the years has been committed to research and development to provide Shenzhen blister machine, Shenzhen bubble shell machine, Shenzhen vacuum blister machine, Shenzhen thick sheet blister machine, Shenzhen blister forming machine, Shenzhen thermoplastic forming machine,blister machine hot line:0755-84817776
Related News
2024-03-20
Blister machine preparation before starting
2024-03-13
Automation Technology of Blister Machine
2024-03-08
Shenzhen Eternal Blister Machinery Features
2024-03-01
Contact us for a complete solution.
Contact:+86 13828714526 Mr. Qu
Telephone:+86 0755-84817776 / +86 0755-84807776
Fax: 0755-84808776
E-mail:yongheng@szyongheng.cn
Address: Building A, 22 Pingxi South Road, Pingxi Community, Pingdi Street, Longgang District, Shenzhen
online message
Add WeChat
