Many people have doubts about whether the blister machine can produce cabinet doors. Today, Eternal Sheng Xiaobian will discuss with you whether the blister machine can produce cabinet doors to make a simple introduction.

1.  

   Material cutting, like the cabinet body plate, is cut by equipment. Different from the cabinet body plate, the door plate has many kinds of materials and colors, which are not suitable for the production of standard parts, so it is generally produced according to orders.

2. 2

   Grooving, the purpose of this slotting is to install the aluminum buckle handle. The slotting will not open the width of the door panel, but will leave a little seal, otherwise the handle will be pulled out from the side after installation. The thickness of the slot is actually operated according to the model of the aluminum buckle handle, which is generally slightly smaller than the thickness of the aluminum buckle handle insertion, so that the aluminum buckle handle can be fixed.

3. 3

   Edge sealing, different materials will determine whether to seal the edge. Generally, the materials to seal the edge are melamine, fireproof board, crystal board, etc. The sealed edge is generally the same color edge of the door panel, mostly 2mm thick edge sealing. In order to improve the quality, the sealing edge used is aluminum sealing edge.

4. 4

   Punching, the punching here is different from the cabinet body plate. The holes here are door reaming holes. In order to reduce the error rate, the current factories often leave this step to the dealers to handle themselves.

5. 5

   Gong groove, if the door is a pattern, will use this process.

6. 6

   Blister, blister the steps are very simple, first of all, the door panel is polished, and then spray glue, and then put the door panel into the blister machine, you can carry out blister operation, process quality and machinery and equipment are closely related.

7. 7

   Baking paint, this step is quite complicated, there are many steps in the process, and it is mainly made by hand, so it is necessary to have considerable experience and technology to spray out high quality finished products.

8. 8

   The handle here is aluminum buckle handle. Generally, the handle is handled by the distributor.

If you want to know more, please call our service hotline 0755-84817776, Eternal Plastic Factory will serve you wholeheartedly.