Shenzhen Eternal Machinery FactoryThe mold of the blister machine will be adjusted according to the customer's demand for production capacity, and its output and complexity determine which mold to use for mass production.

Shenzhen blister machine：

 1Shenzhen blister machine adopts plaster mold production, mold production process is similar to blister proofing, the advantage is that the production cycle is short, the cost is the lowest, the production of a full version(60X110cm)The mold only takes one to two days. The disadvantage is that the surface of the finished blister product is rough, the mold is easy to break during production, and the durability is poor. Products with large depth, high complexity and thick sheets cannot be formed.

 2Shenzhen blister machine adopts electroplating copper mold, and its process is to spray a layer of conductive agent on the surface of the well-made bubble shell, and then put it into the electrolytic tank to be plated with a thick copper layer. The electroplating process requires72Hours, then to the copper mold gypsum (increase hardness), polishing, air hole treatment, the advantages of using electroplating copper mold production is blister products smooth surface, moderate cost, strong durability, the disadvantage is that the mold production cycle is long, can not complete the production of precision blister products.

  3Shenzhen blister machine adopts blister aluminum mold production, mold production needs to use computer design drawings, and then useCNCCNC milling machine processing, the advantage is that the production cycle is moderate, the late mold processing time is short (drilling air hole work inCNCCompleted during processing), the blister product has high dimensional accuracy, strong mold durability, and the disadvantage is high cost.

 Shenzhen blister machine due to the full automatic high speed blister forming machine molding range is66X110cmLeft and right, so whether it is plaster mold, copper mold or aluminum mold, we need to put together individual molds to reach the molding size. We all call this process imposition, which needs to be put together on aluminum plate or wood board with good pores. After the completion, we call it the bottom mold.

4For products with large blister forming depth of Shenzhen blister machine, it is also necessary to make an upper mold. While the bottom mold vacuum suction forms the sheet, pressure is applied from above the sheet to evenly stretch the sheet to each part, otherwise the local thickness will be too thin. The entire production cycle of the production mold should be5To7Day.

Shenzhen blister molding production: it is produced by using a full-automatic high-speed blister molding machine. its basic principle is: the rolled sheet is pulled into an electric furnace oven and heated to a softened state, then pulled to the top of the blister mold by heat, the mold is moved up and vacuumed, the softened sheet is adsorbed to the surface of the mold, and cooling water is sprayed on the surface of the formed sheet in mist to harden, and the formed sheet is automatically pulled to the storage box, the pneumatic cutter separates the formed sheet from the unformed sheet, completing the entire process.

SHENZHEN YONGHENGSHENG MACHINERY MANUFACTURING CO., LTD19Over the years has been committed to research and development to provide Shenzhen blister machine, Shenzhen bubble shell machine, Shenzhen vacuum blister machine, Shenzhen thick sheet blister machine, Shenzhen blister forming machine, Shenzhen thermoplastic forming machine,Contact Hotline:0755-84817776