In order to make good use of employeesBlister machineTo ensure the smooth progress of production, to ensure the health and safety of employees, to ensure that products in production can meet the quality standards, the development of blister machine using the following procedures:

1. blister machine operating procedures

　　1Open the air source switch of the blister machine, input compressed air, and the press plate of the machine is automatically closed. According to the size of the package and the actual packaging situation, the air pressure is adjusted to the appropriate pressure. The greater the air pressure, the faster the press pressure, and the greater the pressure.

　　2Turn on the power of the blister machine220VSocket, open the machine circuit assembly, then place the electric wood mold on the turntable, and then connect the wire on the mold to the terminal in the middle of the turntable.

　　33. The blister machine pushes the rotating plate counterclockwise to observe whether the automatic pressing of the pressing plate is normal. If there is no abnormality, the blister cover paper can be placed on the bak mold to start trial packaging, the heating switch can be turned on, the heating time system can be turned on, the current conversion system can be adjusted from small to large, and the appropriate heating current gear, heating time system and cooling time system can be selected according to the actual mold size, and adjusted to satisfaction respectively.

　　42. The operator of the blister machine puts the blister parts, the packaged materials and the cardboard into the electric wood mold in sequence, and rotates the mold table counterclockwise. The machine automatically completes the sealing of the packaged materials according to the debugged condition.

　　5After the blister machine is finished, close the general system and air source.

What are the parts of Shenzhen blister machine

2. blister machine safety precautions

　　1During the operation of the machine, do not put your hands under the pressure plate.

　　2After the electric wood mold is electrified, its surface must be covered with a layer of thick cardboard to prevent the heating plate of the electric wood mold from burning the elastic glue of the machine pressure plate.

　　33. Operators must receive pre-job training, and only after passing the training can they hold the work license.

Shenzhen blister machine forming sheet

3. blister machine maintenance and cleaning matters

　　11. Clean the fuselage workbench once a day.

　　2Every week, add oil to the oil mist device of the pressure regulating valve.1Times.

　　3Add butter to cylinder guide post every week1Times.

　　4A comprehensive maintenance of the blister machine every year.

blister machine blister molding process

4. blister machine work record

Thick sheet blister machine, and blister packaging of thin blister production methods are similar, are based on vacuum blister, most of these plastic products are used in flowerpots, water basins and so on. The material of this package is thicker on the article during the production process.

Thick blister means that the thickness of the raw materials used exceeds2mm, It is impossible to form plastic on a fully automatic machine, and the technology of processing and production of a semi-automatic plastic forming machine dedicated to thick plates must be adopted.

Thick blister products generally have the characteristics of large area, large height and thick material, and are often processed with the following materials:ABSAcrylic (plexiglass),PS,PC,PVCWait.

SHENZHEN YONGHENGSHENG MACHINERY MANUFACTURING CO., LTD16Over the years has been committed to research and development to provide Shenzhen blister machine, Shenzhen bubble shell machine, Shenzhen vacuum blister machine, Shenzhen thick sheet blister machine, Shenzhen blister forming machine, Shenzhen thermoplastic forming machine,Contact Hotline:0755-84817776