Shenzhen Yonghengsheng Machinery was founded in 2000. It is a machinery manufacturing enterprise integrating production, sales and service. It is a machinery factory with a brand of 19 years. Its position in the industry is also very important. Today, Eternal Sheng Xiaobian will tell you about some common problems in servo motor blister machines. If you don't understand them, it doesn't matter. Please go and have a look with Xiaobian!
1. The suction film is not in place: the vacuum degree is not enough, air leakage, temperature is not enough, the film is too thin, the workpiece is pasted with other materials, the concave depth of the workpiece exceeds the pulling up of the film, the suction time is too short, the film is not pulled up, and the workpiece distance is too close.
2. Incorrect temperature measurement: thermocouple, temperature controller. Whether the installation is inaccurate and damaged.
3. Trip of main power switch: leakage of input wires at the top of heating box, leakage of distribution box, external wires on equipment, leakage of motor, etc.
4. Signs of absorption: The temperature is too high, the heating time is too long, the film quality is not good, and there is no heating.
5. The machine does not start: the input wire is blocked, the power cord is reversed, and the voltage is not enough.
6. Pull down the membrane when it is not covered: whether the solenoid valve or hand valve is open.
7. The working vacuum degree does not come up: the gas circuit is blocked, the hand valve or solenoid valve is not closed, the vacuum pump motor belt is loose, and the vacuum gauge is damaged.
If 【VacuumBlister machine]]The emergence of this series of problems as long as the right remedy, the corresponding repair and maintenance, can be a good solution to this problem. If there is anything unclear, please consult Eternal Sheng Xiaobian. We will serve you wholeheartedly. For details, please call 0755-84817776.
