News

News

2016-09-21

Introduction of the main features of the blister machine

The product specifications have strong adaptability. The blister machine method can be used to manufacture various products with extra large, extra small, extra thick and extra thin sheets. The sheets can be as thin as 1~2MM or even thinner. The product area can be as large as 10 ㎡, as small as several square millimeters, and the wall thickness can be as large as 20mm and as small as 0.1mm.

Introduction of the main features of the blister machine

2016-09-21

Blister machine introduction and principle

Principle of blister machine: blister molding is also called thermoplastic molding. This molding process mainly uses vacuum suction generated by vacuum pump to blister thermoplastic plastic sheets such as PVC, PET, PETG, APTT, PP, PE, PS, etc. after heating and softening into vacuum covers of various shapes through molds, or stick them to the surfaces of products of various shapes. According to the thickness of the sheet, the blister is divided into thin sheet blister and thick sheet blister.

Blister machine introduction and principle

2016-09-20

The composition and function (I) of vacuum blister machine

When the plastic sheet is formed, the sheet is fixed to the clamping device. In the hot forming of the general and composite type of hot forming machine more convenient to fix the various sizes of sheet clamping device. Some of the entire molding machine with a set of clamping frame.

The composition and function (I) of vacuum blister machine

2016-09-20

Composition and function (II) of vacuum blister machine

The pneumatic system can be composed of the molding machine with its own compressor, air storage tank, workshop main pipe set, valves, etc. The molding machine needs compressed air with a pressure of 0.4-0.5MPa, and various vacuum suction molding machines widely use piston air compressors. It can also be supplied with large spiral air compressors throughout the plant.

Composition and function (II) of vacuum blister machine

2016-09-19

Blister machine mold functional characteristics

The blister machine and the blister mold are closely related. The blister machine without the blister machine mold is like a gun without ammunition. It is just an empty decoration, which is a necessary auxiliary facility for the blister machine.

Blister machine mold functional characteristics

2016-09-19

Blister machine radiation energy

The vacuum blister forming process of plastic sheets and films of thermoplastic blister machines, one of the main processes of high-speed blister machines is sheet heating.

Blister machine radiation energy

2016-09-18

Independent Grouping Temperature Control Analysis of Blister Machine

Independent Grouping Temperature Control Analysis of Blister Machine

Independent Grouping Temperature Control Analysis of Blister Machine

2016-09-14

Blister machine maintenance note a few points

When the plastic sheet is formed, the sheet is fixed on the clamping device. In the hot forming of the general-purpose and composite type of hot forming machine with a variety of easy to fix the size of the sheet clamping equipment. Some are all molding machines with a set of clamping structure.

Blister machine maintenance note a few points

2016-09-14

Blister machine Blister material

The raw material of blister products of blister machine is only plastic sheet, and the film thickness is generally not more than 1.5MM. Commonly used sheets are PVC, PET, PP, PS and flocking sheet, gold-plated sheet and antistatic sheet on this basis.

Blister machine Blister material
< 1...41424344 >

Contact us for a complete solution.

Contact:+86 13828714526  Mr. Qu
Telephone:+86 0755-84817776 / +86 0755-84807776
Fax: 0755-84808776
E-mail:yongheng@szyongheng.cn
Address: Building A, 22 Pingxi South Road, Pingxi Community, Pingdi Street, Longgang District, Shenzhen

online message

Submit immediately
%{tishi_zhanwei}%