
Products Show
-
Fully automatic positive and negative pressure integrated Fully automatic positive and negative pressure integrated
-
Automatic negative pressure one Automatic negative pressure one
-
Servo Blister Forming Machine Servo Blister Forming Machine
-
Computer numerical control blister forming machine Computer numerical control blister forming machine
-
Thick film blister machine Thick film blister machine
-
Printing product positioning blister machine Printing product positioning blister machine
-
Blister board machine Blister board machine
-
Cutting machine Cutting machine
YH-760C Full computer controlled Servo suction molding machine
1. This machine is mainly for PP, PET, and the upper and lower dies are driven by servomotor at uniform speed to facilitate the high precision product stretching and forming.
2. Full Servo motor pneumatic drive and computer PLC frequency conversion control, with storage memory, correction function (accuracy off scholar 1mm), And it also has a film exit function, to avoid the waste of film, feeding with automatic design.
3. In order to cooperate with the molding of different materials, vacuum displacement use catamaran with the value design of complementary, ensure the tensile strength, thick sheet forming and rapid forming of difficult products.
4. To ensure the forming stability of products with different rules, demoulding is equipped with upper mold, top mold repeat or multiple frequency modes for selection.
5. The ensure furnace adopts a closed type reciprocating movement design,temperature control adopts the independent control of constant pressure,heating is stable and uniform can effectively solve the pet material white,deformation bad waste phenomenon,than the traditional machine save more than 40% of the electricity.
6. The machine increases the water-conveying cooling device and a quick cold spray,and provided with an auxiliary stripping spray function to speed up production and efficiency than the traditional machine fast more than 40%.
1. vacuum catamaran complementary molding function. | 2. Delay vacuum function. | 3. Assisted demoulding spraying function. |
4. Correction design of electrical control in shuice. | 5. Servo motormany times under the model function. | 6. Pneumatic trimming limiting design. |
7. Automatic adjustable device. | 8. Transeverse reciprocating design of heat furnace. | 9. Multiple vertical vibration stripping. |
10. Servo drive correction function. | 11. design of set forming function circuit. | 12. design of rapid stretch forming. |
13. Design of electric reciprocating slice. | 14. Automatic double chain electric feeding equipme. |
Specifications |
YH-760C |
Forming length |
300-1240mm/11-48inch |
Forming width |
410-710mm/17-28inch |
Forming height |
200mm/7inch |
Frequency |
220-600次/时 |
Vacuum pump(motor) |
3KW 4HP |
Control form |
Full computer PLC inverter memory |
Heat furnace control |
60 independent control |
Bottom die maximum stroke |
320mm |
Power |
AC380V/220V 50HZ |
Actual power consumption |
15-20KW |
Dimensions |
L7440mm×W1850mm×H2600mm |
Weight |
About 4500KG |
Related products
Shenzhen Yonghengsheng Machinery Manufacturing
Co., Ltd.
Phone: 0755-84817776 84807776
Fax: 0755-84808776
Mobile Phone:13828714526 屈先生
Email: yongheng@szyongheng.cn
Address: Building a, No.22, South Pingxi Road, Pingxi community, Pingdi street, Longgang District, Shenzhen
Copyright ©2020 Shenzhen Yonghengsheng Machinery Manufacturing Co., Ltd. 粤ICP备05089896号 by: www.300.cn