News

News

2024-03-20

Blister machine operation

Blister machine is the use of vacuum and different mold will be a variety of preheated sheet processing into different shapes of plastic products equipment. Mainly used for thermoforming sheet (PVC, PP, PE, PS, PET, APET, PETG, BOPS, PLA biodegradable materials, etc.). The raw material coil is placed on the device. When the feeder moves, the raw material is fed into the blister machine. During the feeding operation, the material first enters the heating zone, and the material is heated to the appropriate temperature through the machine setting temperature, heating time and other instructions. Blister molding, will be heated to the appropriate temperature of the material through the vacuum device to generate negative pressure, adsorption on the mold, so that it produces the same shape as the mold, and then through the cooling hardening molding. The formed material enters the cutting area, and the machine presses and cuts the material according to the set parameters to produce the finished product.

Blister machine operation

2024-03-13

Blister machine preparation before starting

1. Wear the production clothes specified by the workshop before taking up the post. 2, clean around the equipment, not allowed to store items unrelated to production on the equipment. 3. Clean up the sundries inside and outside the equipment, wipe the blister mold with clean cotton yarn, and remove the stains on the surface of the mold. 4, check the hydraulic station oil level, not enough filling. 5. Before starting up, carefully check the power supply, control system and heating system of the blister machine to see if it is normal and the button is in the accurate position. 6. Install the mold to the blister machine accurately.

Blister machine preparation before starting

2024-03-12

Shenzhen city eternal Sheng Machinery Manufacturing Co., Ltd. Automatic Blister Forming Machine

Blister machine, also known as thermoplastic molding machine, is a machine that sucks heated plasticized PVC, PET, PETG, APTT, PP, PE, PS and other thermoplastic coils into various shapes of advanced packaging boxes, frames and other products. It mainly uses vacuum hood, blister tray, bubble shell, etc. in the shape of vacuum pump, and then these vacuum blister forming products often need to be cooled before demoulding. The traditional blister machine includes a blister mold, and the blister mold includes an upper mold and a lower mold. The diaphragm is placed on one side of the blister mold in a roller pack. Pull out the end of the diaphragm and horizontally pass through the blister mold. The upper mold and the lower mold are combined to form a cavity. Vacuum adsorption is used to attach the diaphragm in the cavity to the surface of the cavity. After cooling, the diaphragm is formed to form a blister product. During the rolling process, the diaphragm will generate electrostatic friction, and its surface is easy to absorb dust or impurities in the air. If the dust or impurities on its surface are not treated, it will enter the blister mold with the diaphragm, resulting in defects such as bubbles, pinholes, pitting and the like on the surface of the blister product, which will reduce the appearance quality of the blister product. For blister products with high appearance quality requirements, it will directly lead to scrap, reduce the product qualification rate. On the other hand, the dust or impurities brought by the diaphragm are easily left in the cavity of the blister mold, and the blister mold needs to be cleaned in time, which increases the equipment maintenance cost. Dust or impurities are not cleaned up in time and accumulated for a long time, which will affect the molding shape of blister products, affect product quality, and shorten the service life of blister molds. In order to solve the above technical problems, our company decided to establish a research and development project for this project. Shenzhen city eternal Sheng Machinery Manufacturing Co., Ltd. fully automatic blister forming machine, compared with the common fully automatic blister forming machine, has added a longitudinal cutting device, a cutting conveying device, an automatic feeding device and a transverse air sealing device in the mold. Blister products of any length can be produced on a pair of molds, and the products can be automatically cut and output according to the requirements of product length in the transverse direction, thus realizing multi-purpose of one machine and multi-purpose of one mold, and improving the use efficiency and automation degree of the blister molding machine.

Shenzhen city eternal Sheng Machinery Manufacturing Co., Ltd. Automatic Blister Forming Machine

2024-03-01

Shenzhen Eternal Blister Machinery Features

High 1. speed, low noise, high reliability, convenient operation and maintenance; 2. the molding machine with a market speed of up to ± 28 cycles per minute to achieve high-speed molding; 3. This machine adopts force arm servo drive, PLC numerical control touch automatic control system is impeccable for high-speed molding of PP, BOPS, PET, APET, PETG, PVC, PS, PLA starch lowering materials, etc; 4. the positive and negative pressure thermoforming die, replacement system and steel knife punching and stacking device optimized according to human efficiency, thus ensuring the maximum production space; 5. heating system, using a new temperature control module, fast response, short time, high efficiency, low energy consumption; 6. molding process: feeding-preheating-negative pressure molding-blanking-stacking-packaging, etc., combined with artificial mechanics, intelligent production.

Shenzhen Eternal Blister Machinery Features

2021-11-22

Blister machine choose what brand?

Looking for reliable blister machine products choose eternity blister machine, focus on blister machine innovation and manufacturing for 18 years, adhere to the technical guarantee, product quality assurance, after sales service guarantee.

Blister machine choose what brand?

2021-10-31

Design of Automatic Blister Machine Based on PLC Technology

In view of the defects in the electrical control of the old-fashioned blister machine, the electrical control system of the blister machine is reformed by PLC, and the design method of PLC control system is used. Compared with the previous manual or semi-automatic blister machine, the efficiency of blister work and product quality are improved, and the system flexibility is increased. The programmable controller has the advantages of strong anti-interference ability, high reliability, stable operation, long service life and easy maintenance to find external lines, so it is widely used in the automatic control of industrial production. The use of PLC to achieve automatic control of the blister machine can improve the control accuracy of the system, greatly improve the quality of the blister machine and work efficiency, in order to bring greater economic benefits for enterprises. Eternal blister machine adopts plc numerical control touch automatic control system, completed the development of automatic blister machine. For 18 years, the company has been committed to developing and providing negative pressure integrated plastic molding machine, positive and negative pressure integrated plastic molding machine series, servo plastic molding machine series, thick sheet plastic molding machine series, printing sheet plastic molding machine series and non-standard mechanical development and design, mold matching, etc.... plastic molding machine hotline: 0755-84817776, if you want to know more, you can also go to the official website to see www.szyongheng.cn/

Design of Automatic Blister Machine Based on PLC Technology

2021-10-30

Mechanical function of positive and negative pressure integrated plastic forming machine

1. Positive and negative pressure forming design; 2. Design of plc integrated functional circuit; 3. Independent design of infrared ceramic heat radiation; 4. Driving design of servo arm for forming and punching; 5. Quick cooling and shaping design; 6. Automatic cutting and stacking design; 7. Electric feeding design; 8. Automatic winding design of edge materials

Mechanical function of positive and negative pressure integrated plastic forming machine

2021-10-30

Eternal blister machine purchase process

Yonghengsheng blister machine purchase process: 1. Communicate the needs, the customer communicates with the factory, and the factory defines the customer needs; 2. Scheme quotation, the factory coordinates the safety plan and makes quotation to the customer according to the customer's needs; 3. Signing payment, both parties draw up a contract to sign the contract, and after negotiating the payment method, the customer will make payment; 4, production and delivery, the factory according to the contract production, delivery on schedule; 5, the factory arranges professional personnel to carry out installation and debugging to ensure the normal operation of the machine without other problems. And technical training for the buyer's staff to ensure the normal use of the customer's machine.

Eternal blister machine purchase process

2020-09-14

Eternal Blister Machine: Blister Machine Safe Use Guidelines

1. Please read the instructions carefully and use and maintain the machine tool correctly as required. 2. The machine should be grounded reliably to prevent leakage. 3. All protective covers shall not be opened during operation. 4, do not put the head hand into the machine tool, should pay attention to the worktable exit caused by the collision. 5. When leaving the machine, the machine must be completely shut down and the power supply must be turned off.

Eternal Blister Machine: Blister Machine Safe Use Guidelines
< 1234...24 >

Contact us for a complete solution.

Contact:+86 13828714526  Mr. Qu
Telephone:+86 0755-84817776 / +86 0755-84807776
Fax: 0755-84808776
E-mail:yongheng@szyongheng.cn
Address: Building A, 22 Pingxi South Road, Pingxi Community, Pingdi Street, Longgang District, Shenzhen

online message

Submit immediately
%{tishi_zhanwei}%