Blister machine PET material
- Categories:Industry News
- Time of issue:2016-10-10 00:00
Blister PET plastic is the abbreviation of English Polyethylene terephthalate, referred to as PET or PETP.
Chinese means: polyterephthalate plastics, mainly including polyethylene terephthalate PET and polybutylene terephthalate PBT.
Polyethylene terephthalate is also commonly known as polyester resin, commonly known as polyester resin. It is a condensation polymer of terephthalic acid and ethylene glycol. Together with PBT, it is collectively referred to as thermoplastic polyester, or saturated polyester.
Which is better, blister machine or injection molding machine
PET is a milky white or light yellow, highly crystalline polymer with a smooth and shiny surface. It has excellent physical and mechanical properties in a wide temperature range. The long-term use temperature can reach 120℃. The electrical insulation is excellent. Even at high temperature and high frequency, its electrical performance is still good, but the corona resistance is poor. Creep resistance, fatigue resistance, friction resistance and dimensional stability are all very good.
Analysis of Process Cost of Blister Machine
Advantages of PET as a packaging material for blister machines:
①It has good mechanical properties, impact strength is 3~5 times that of other films, and good folding resistance.
②It is resistant to oil, fat, dilute acid, dilute alkali, and most solvents.
③It has excellent resistance to high and low temperatures. It can be used for a long time within a temperature range of 120°C, and can withstand high temperatures of 150°C and low temperatures of -70°C in short-term use, and has little effect on its mechanical properties at high and low temperatures.
④The gas and water vapor permeability is low, and it has excellent gas, water, oil and odor resistance.
⑤High transparency, can block ultraviolet rays and good gloss.
⑥Non-toxic, tasteless, good hygiene and safety, and can be directly used for food packaging.
Features of single-mode automatic blister machine
Polyethylene terephthalate (English: Polyethylene terephthalate, abbreviated as PET), is a common resin in life, can be divided into APET, RPET, PETG.
Shenzhen Yonghengsheng Machinery Manufacturing Co., Ltd. has been committed to research and development for 16 years to provide Shenzhen blister machine, Shenzhen blister machine, Shenzhen vacuum blister machine, Shenzhen thick film blister machine, Shenzhen blister forming machine, Shenzhen thermoforming machine, Contact hotline:0755-84817776