Today I will tell you a brief introduction of the double-head thick film blister machine. It doesn’t matter if you don’t understand it like this, so let me follow the editor of Shenzhen Yonghengsheng Blister Machine.

 

         Mechanical structure of blister machine: heating system, molding system, vacuum system, air pressure system, cooling system, control system, etc.

 

         Working principle: feeding → heating → forming → cooling → discharging

 

         Equipment composition and operation mode of blister machine:

 

         Heating system: The heating furnace uses infrared ceramic heating bricks to heat up and down. The heating furnace adopts a moving furnace.

 

          Temperature control system: A temperature controller is used to control the heating bricks one-to-one, so that the temperature in the furnace can be increased evenly.

 

          Cooling system: mold temperature controller, Japan Meiji cold water spray gun (sprayer) and strong cold air composition,

 

          Molding system: The molding part is composed of a sealed air box, a sheet-pressing frame, an upper mold assembly and a lower mold assembly. The lower mold is vacuum formed in the molding process, and the lower mold is equipped with a balance synchronizer to ensure smooth operation of the mold base.

 

          Vacuum system: Equipped with a complete vacuum system, including vacuum box, vacuum pump, vacuum storage tank, vacuum valve, back blow mold release device, secondary vacuum and delayed vacuum.

 

         Shenzhen Yonghengsheng Machinery Manufacturing Co., Ltd. has been committed to research and development for 16 years to provide Shenzhen blister machine, Shenzhen blister machine, Shenzhen vacuum blister machine, Shenzhen thick film blister machine, Shenzhen blister forming machine, Shenzhen thermoforming machine, Blister machine hotline: 0755-84817776, if you want to know more, you can also enter the official website: http://szqxj.a5.nw-host.com/