Yonghengsheng blister machine: operation rules of vacuum blister machine
- Categories:Industry News
- Time of issue:2016-11-10 00:00
Summary of safe operation rules for vacuum blister machine: Only when the material temperature and mold temperature reach the predetermined parameters (requirements), you must carefully check whether there are impurities and debris in the mold when loading and unloading. Hard objects and metal objects are strictly prohibited. Into the mold
Safety operating procedures for vacuum blister machine
Acrylic Blister Machine
1. Before starting the machine, carefully check the power supply, control system, and heating system of the blister machine to see if it is normal, add lubricating oil as required, press the (rotary) button to see if it is in the correct position, and start as required for trial operation.
2. Correctly install the mold on the vacuum blister machine.
3. When the raw materials need to be dried, they should be dried in an oven as required.
Important instructions for blister machine
Fourth, check whether the raw materials meet the requirements of the vacuum forming machine.
5. Set and adjust the mold parameters of the vacuum suction molding machine, and set various parameters such as opening, closing and ejecting according to the specific conditions of the mold, until the mold runs normally, smoothly and safely.
6. Set the required temperature according to the thickness of the processed material, and preheat the mold.
Safety knowledge of blister machine manufacturers
7. When the material temperature and mold temperature reach the predetermined parameters (requirements), the mold should be carefully checked for impurities and debris when loading and unloading. It is strictly forbidden to hard objects and metal objects into the mold.
8. Carry out pre-processing, observe the deformation of the material, and adjust the parameters according to it until it is smooth and uniform in color and meets the requirements.
9. During the operation of the vacuum blister machine, pay attention to changes in temperature and pressure at all times. If abnormal conditions are found, shut down the machine, turn off the power and let the mechanic repair it, and use it after recovery.
Shenzhen Yonghengsheng Machinery Manufacturing Co., Ltd. has been committed to research and development for 16 years to provide Shenzhen blister machine, Shenzhen blister machine, Shenzhen vacuum blister machine, Shenzhen thick film blister machine, Shenzhen blister forming machine, Shenzhen thermoforming machine, Contact hotline:0755-84817776
Previous : Eternal Sheng blister machine: the development process of blister machine manufacturers is hindered and difficult to move forward