
News
Yonghengsheng Blister Machine: Clamping Equipment of Vacuum Blister Forming Machine
- Categories:Industry News
- Author:
- Origin:
- Time of issue:2016-12-21 00:00
- Views:
Today I will tell you about the clamping equipment of the vacuum forming machine. It doesn’t matter if you don’t understand it like this, so let me follow the editor of Shenzhen Yonghengsheng Blister Machine.
When the plastic sheet is formed, the sheet is fixed on the clamping device. For thermoforming general-purpose and composite thermoforming machines, clamping devices that are convenient for fixing sheets of various sizes are often used. Some blister forming machines are equipped with a clamping structure for all forming machines.
Clamping equipment can be divided into two categories: one is structural, and the other is split. Structural clamping equipment is composed of upper and lower structures. The sheet is sandwiched between two structures. When the structure is opened, the lower structure usually remains fixed. The lower part of the upper structure of various types of single-station molding machines is directly fixed on the molding room. The manual and semi-automatic molding machines that load parisons and products by hand are equipped with safe operation equipment within the open range of the structure when the structure size is large. For parisons with large molding slip, the clamping force is required to be adjusted in a relatively wide range. For this reason, two rubber-coated rollers are selected, which are pressed against each other with tension springs, and are equipped with pressure conditioning equipment. The clamping of successive pull-tab forming machines is the common effect of the two-end zippers and the front and rear brakes.
It is best to use automatic control for the clamping equipment, in order to move quickly, which can help improve the quality and power of the parts.
Shenzhen Yonghengsheng Machinery Manufacturing Co., Ltd. has been committed to research and development for 16 years to provide Shenzhen blister machine, Shenzhen blister machine, Shenzhen vacuum blister machine, Shenzhen thick film blister machine, Shenzhen blister machine molding machine, Shenzhen thermoforming machine , Blister machine hotline: 0755-84817776, if you want to know more knowledge, you can also enter the official website to see www.szyongheng.cn/
Shenzhen Yonghengsheng Machinery Manufacturing
Co., Ltd.
Phone: 0755-84817776 84807776
Fax: 0755-84808776
Mobile Phone:13828714526 屈先生
Email: yongheng@szyongheng.cn
Address: Building a, No.22, South Pingxi Road, Pingxi community, Pingdi street, Longgang District, Shenzhen
Copyright ©2020 Shenzhen Yonghengsheng Machinery Manufacturing Co., Ltd. 粤ICP备05089896号 by: www.300.cn