Today in the editor, I will tell you what are the coup ways to eliminate the failure of the blister machine equipment? It doesn’t matter if you don’t understand it like this, so let me follow the editor of Shenzhen Yonghengsheng Blister Machine.

 

             1. The machine does not start: the input wire is blocked, the power wire is connected reversely, and the voltage is not working.

             2. Inaccurate temperature measurement: thermocouple, temperature controller. Is the device incorrect or damaged?

             3. The vacuum degree of the equipment of the blister machine cannot be increased: the air path is blocked, the hand valve or solenoid valve is not closed, the vacuum pump motor belt is loose, and the vacuum gauge is damaged.

             4. The main power switch trips: leakage of the input wire on the top of the heating box, leakage of the distribution box, leakage of external wires on the equipment, and leakage of the motor.

             5. The suction film is not in place: the vacuum degree is not good, the air leaks, the temperature is not good, the film is too thin, the workpiece has been pasted with other materials, the depth of the workpiece exceeds the pulling of the film, the suction time is too short, the film is not pulled, the workpiece The distance is too close.

             6. The surface of the overlaid workpiece is folded and not smooth or the corners cannot be wrapped: the film is not straightened, the film quality is not good, the workpiece is not polished, too much glue is sprayed, and the template under the workpiece is too low.

             7. When the film is not sucked and covered, the film is pulled up downward: Is the solenoid valve or hand valve open?

             8. The scene is broken: the temperature is too high, the heating time is too long, the film quality is not good, and there is no heating.

 

              Pay attention to the equipment of the blister machine during operation: When selecting (PVC) film, the manufacturer must provide all technical data. Please select (PVC) special adhesive, and you must have all the data. According to the above data, you can set the required reasonable data to obtain the desired quality and economic benefits.

 

               Shenzhen Yonghengsheng Machinery Manufacturing Co., Ltd. has been committed to research and development for 16 years to provide Shenzhen blister machine, Shenzhen blister machine, Shenzhen vacuum blister machine, Shenzhen thick film blister machine, Shenzhen blister machine molding machine, Shenzhen thermoplastic molding machine , Blister machine hotline: 0755-84817776, if you want to know more knowledge, you can also enter the official website to see www.szyongheng.cn/