News
How to repair and maintain the blister machine
- Categories:Company News
- Author:
- Origin:
- Time of issue:2017-04-18 00:00
- Views:
How to repair and maintain the blister machine
The following editor of this website will introduce how to maintain and maintain the blister machine:
1. Keep clean and hygienic, clean the surrounding debris and dirt in the machine after shutdown
2. The water filter in the air circuit should be drained once every work shift, and the lubricator should be refueled frequently to ensure the normal use of the solenoid valve and the cylinder
3. All sliding guide posts, bearings and sprocket must be kept in good lubrication condition, and lubricate frequently
4. Check the oil level of the vacuum pump in each work shift (the oil should not be lower than the oil level); the vacuum pump oil should be replaced once a month
5. Frequently observe the oil volume of the lubricator, adjust the oil volume timely, and increase it when the new machine is used (about 1 bottle of oil in 3 days) after one week of use, it can be reduced to ensure adequate lubrication of all pneumatic components.
The above is the relevant content of "How to repair and maintain the blister machine" collected by the editor of this website for everyone! Shenzhen Yonghengsheng Machinery Manufacturing Co., Ltd. has been committed to research and development for 16 years to provide Shenzhen blister machine, Shenzhen blister machine, Shenzhen vacuum blister machine, Shenzhen thick film blister machine, Shenzhen blister forming machine, Shenzhen thermoforming machine, Blister machine hotline: 0755-84817776
Shenzhen Yonghengsheng Machinery Manufacturing
Co., Ltd.
Phone: 0755-84817776 84807776
Fax: 0755-84808776
Mobile Phone:13828714526 屈先生
Email: yongheng@szyongheng.cn
Address: Building a, No.22, South Pingxi Road, Pingxi community, Pingdi street, Longgang District, Shenzhen
Copyright ©2020 Shenzhen Yonghengsheng Machinery Manufacturing Co., Ltd. 粤ICP备05089896号 by: www.300.cn