Safety operation rules and precautions in the production process of vacuum blister machine
- Categories:Company News
- Time of issue:2017-04-20 00:00
1. During operation, you should always pay attention to temperature and pressure changes. If abnormal conditions are found, shut down and turn off the power to be repaired by a mechanic.
2. It is forbidden to turn off the alarm system and safety protection system during operation, and it is forbidden to work in the state where the safety protection device fails.
3. During the operation, no one is allowed to enter the operating space during the operation of the equipment.
4. When discharging, it is forbidden to switch on the material clamp and heating plate while discharging.
5. It is forbidden to operate the blister machine by unqualified personnel.
6. Concentrate your energy during operation and prohibit talking while working.
7. When using air-compressed air pipes to purge debris, it is forbidden to blow at personnel to prevent debris from entering the eyes.
Well, the above content is the relevant content of "Safety Operation Rules and Precautions in the Production Process of Vacuum Forming Machine" collected by the editor of this website for everyone! Shenzhen Yonghengsheng Machinery Manufacturing Co., Ltd. has been committed to research and development for 16 years to provide Shenzhen blister machine, Shenzhen blister machine, Shenzhen vacuum blister machine, Shenzhen thick film blister machine, Shenzhen blister forming machine, Shenzhen thermoforming machine, Blister machine hotline: 0755-84817776
Technical support: Mingpinhui Network