img
/
/
>
What should be paid attention to in the operation of small blister packaging machine?

News

What should be paid attention to in the operation of small blister packaging machine?

  • Categories:Company News
  • Author:
  • Origin:
  • Time of issue:2017-05-09 00:00
  • Views:
The blister packaging machine uses pneumatic components to drive the pressing plate to work. It uses the principle of adjustable point heating to complete the sealing of PVC, FE, PP and other plastic molding materials and cardboard. It is easy to operate and suitable for all kinds of exquisite toys, stationery, daily necessities, and small tools. The blister-sealed packaging makes the packaged items look crystal clear, transparent and crisp, and improves the product quality. Prerequisites for operation; blister packaging machine, blister mold cover, paper card, ventilation and electricity. Pay attention to the following 6 points during operation.
 
1. After the bakelite film is energized, its surface is covered with a layer of thick cardboard to avoid damage to the bakelite film.
 
2. Because the blister packaging machine is a bottom pressure working mode, it is normal for the body to have high induction electricity.
 
3. After the power switch is turned on, there is a time controller for the entire heating and cooling process in the box, which can adjust the length of time when the square mold table is in place.
 
4. When sealing, the surface of the sealing part is wrinkled or damaged. That is because the sealing temperature is too high, so the gear or heating time should be appropriately reduced.
 
5. If the sealing is not strong and easy to peel off, it is because the sealing temperature is too low, so the gear position or heating time should be appropriately increased.
 
6. During operation, always keep the sealing surface clean and remove dirt in time. Before using it every day, open the door and add oil to the middle oil cup to ensure the normal use of the blister packaging machine.
 
Precautions
The printing surface must be wiped with blister oil or PV oil.
 
The full text above is about "What should be paid attention to when operating a small blister packaging machine? 》The relevant content is collected and organized by the editor of this website for you. I hope it will be helpful to you! ! Shenzhen Yonghengsheng Machinery Manufacturing Co., Ltd. has been committed to research and development for 16 years to provide Shenzhen blister machine, Shenzhen blister machine, Shenzhen vacuum blister machine, Shenzhen thick film blister machine, Shenzhen blister forming machine, Shenzhen thermoforming machine, Blister machine hotline: 0755-84817776
Website keywords: blister machine, vacuum blister machine, thick sheet blister machine, blister forming machine, blister machine, thermoplastic forming machine

Latest information

Shenzhen Yonghengsheng Machinery Manufacturing

Co., Ltd.

 

Phone: 0755-84817776 84807776
Fax: 0755-84808776

Mobile Phone:13828714526 屈先生
Email: yongheng@szyongheng.cn
Address: Building a, 22 Daoping Southwest Road, Pingxi street, Longgang District, Shenzhen 

 

Copyright ©2020 Shenzhen Yonghengsheng Machinery Manufacturing Co., Ltd. 粤ICP备05089896号  by: www.300.cn